Your bond is thousands of dollars.Protect it from $10*

Timestamped, hashed photos of your rental, from the day you get the keys to the day you hand them back.

How it works

*$10 at move-in. $15 at move-out if you need it, or $20 for both upfront. See full pricing

Already renting? Record your rental's condition today, before your next inspection.

A renter sitting on the floor of an emptied apartment with her keys and a coffee
A renter photographing a wall scuff during the move-in walkthrough
Close-up of a scuff and paint chip above a skirting board

Five stages, one lease.

Setup is free. Pay $10 when you move in and $15 only if you need to answer the agent at move-out, or $20 for both upfront.

  1. Stage 1 · Free

    Set up the tenancy

    Address, state, lease dates, rent, bond and your agent’s email. Eight rooms appear ready to edit, and your state’s deadlines land on your dashboard.

    A renter at a kitchen table with a printed lease and new keys
  2. Stage 2 · Move-in $10

    Walk it room by room

    Each room gets its own checklist: shower, toilet and exhaust fan in the bathroom, oven, rangehood and benchtops in the kitchen, with a tip on what to photograph for every item. Add your own items, shoot with the in-app camera and our server stamps the time. Mark something Damaged and AI suggests a tag for you to confirm.

    A renter photographing a scuff on a living room wall
  3. Stage 3 · Lock and send

    Lock it, then send it

    You sign a short declaration, then locking hashes every photo so any change shows. Download the PDF, review the email, send it to the agent, and the date and time are recorded for good.

    A renter in an open doorway sending the report from his phone
  4. Stage 4 · During the lease

    Log the leak in month six

    New damage or a repair need goes in with timestamped photos and is emailed to the agent, so it counts as already reported at move-out.

    Water dripping from a pipe joint under a bathroom vanity
  5. Stage 5 · Move-out $15

    Answer every deduction

    Reshoot each item with the move-in photo overlaid on your camera. AI separates new damage from old, drafts a reply to each deduction, and you download an itemised evidence pack.

    A renter kneeling to photograph a skirting board on move-out day

What your agent receives.

Every item shows its condition, how the photo was taken and the start of its SHA-256 hash. Gallery uploads carry an “Imported” label, even in the report.

Move-in record, lockedExample
Living
walls
Damaged
"Paint scuff and small chip above the skirting board"
2 shotsCamera
9f8b2c4e…
Kitchen
appliances
Fair
"Rear cooktop element lightly discoloured"
1 shotCamera
a1b2c3d4…
Bathroom
fixtures
Good
"Tapware clean, no leaks"
1 shotImported
5e6f7a8b…
Bedroom 1
windows
Fair
"Sliding frame latch is stiff"
1 shotCamera
3c4d5e6f…

Same angle, a year later.

At move-out your move-in photo sits over the camera view, so you line up the same shot. Then AI marks what is new, what was there on day one, and what you already reported.

Kitchen at move-out with a burn mark and a cracked tileKitchen at move-in, clean benchtop and intact teal tilesMove-inMove-out

Pay per tenancy. Never monthly.

One-off payments in Australian dollars. Add a flatmate for $5 each.

Tenancy setup

$0per tenancy

  • Property and bond details
  • Eight editable default rooms
  • State deadlines and reminders

Full Lease Protection

$20one-off, per tenancy

Move-in and move-out together. $25 if bought separately, save $5.

  • Everything in Move-in
  • Everything in Move-out & dispute
  • Move-out stays unlocked until you need it

Move-out & dispute

$15one-off, per tenancy

  • Overlay reshoot at the same angle
  • AI move-in vs move-out comparison
  • Drafted deduction responses
  • Evidence pack PDF

Your state’s deadline, worked out for you.

Most renters never learn how long they have to return entry condition report comments. BondKeeper puts the date on your dashboard, with its source.

General information about tenancy rules, not legal advice. Check with your state authority.

ACT

2 weeks after receiving the report (RTA 1997 Sch 1 standard terms)

NSW

7 days after taking possession

NT

5 business days after receiving the copy (landlord must supply within 3 business days of possession)

QLD

7 days after the later of occupying or receiving the report (Form 1a)

SA

No confirmed statutory deadline. Check with CBS.

VIC

5 business days after the move-in date

WA

7 days after receiving the copies (RTA 1987 s 27C); silence = deemed agreement

Questions renters ask.

My agent already gives me a condition report. Why do I need this?
The agent’s report is their record, and at move-out it’s what they compare against. It’s often brief, with photos they chose. BondKeeper gives you your own timestamped photos, checks the agent’s report for anything it missed, and helps you send your comments before your state’s deadline. Then it keeps protecting you through the lease and at move-out.
Why does it matter that the server stamps the time?
Your phone’s clock can be changed. BondKeeper records the time your photo reached our server and keeps the original file untouched, so the date is much harder to dispute.
Can I use photos I already took?
Yes. Gallery uploads are accepted, but they are labelled “Imported” everywhere they appear, including in the report the agent sees. Honest labels keep the rest of the record credible.
What does locking the report do?
It computes a SHA-256 hash of every photo and freezes existing entries. You can still add photos later; they show the date they were added.
Does anything go to my agent without me seeing it?
No. Every email, from the move-in report to an issue log, opens on a review screen first. One tap sends it and records when.
Can my flatmates add photos?
Yes, for $5 each. Flatmates can contribute photos and logged issues to the shared tenancy. Locking, sending and paying stay with the tenancy owner.
Where are my photos stored, and who sees them?
On servers in Germany. Google and Anthropic in the United States analyse them to suggest damage tags. Only you, flatmates you invite and people you send a share link to can see them. Your photos are never sold or used to train AI.
What’s Full Lease Protection?
Move-in and move-out together for $20, instead of $25 separately. Move-out stays unlocked for that tenancy until you need it. If BondKeeper ever closes before you use move-out, we’ll refund $10.
Can I get a refund?
Yes, within 7 days of paying, as long as you haven’t locked a report or downloaded an evidence pack for that stage. Email support@bondkeeperau.com from the address you paid with.
Why does my bank statement say OHMYUNICORN FORGE OMU?
BondKeeper runs on the OhMyUnicorn platform, and OMU SAS processes payments for us. Your receipt shows the BondKeeper item you bought. If you don’t recognise a charge, email support@bondkeeperau.com before contacting your bank and we’ll sort it out quickly.
Can I delete my data?
Yes. Settings has “Delete my account and data”. Your photos, records and share links are deleted straight away. Download your reports first if you want to keep them.
Is this legal advice?
No. Every report is a record of property condition prepared by the tenant. It is general information, not legal advice. Each state panel links to the official authority and tribunal.
Two flatmates handing over keys in an emptied rental hallway

Hand the keys back with the evidence on your side.